|
|
|||
|
|
|
|
|
Engine Mounts and Crossmembers
For
'62 - '67 NOVA
and
64½ - 70 MUSTANG
'62- '67 NOVA
Now you can give your '62-67 Chevy Nova the lowered look and superior handling the street rods have enjoyed for years. Heidt's now offers Mustang II Front Suspension crossmembers and components for '62-'67 Novas to make it easy!
MUSTANG II CROSSMEMBER
This new Mustang II Crossmember is specifically designed to fit the front frame of '62-'67 Novas. This Independant Front Suspension (IFS) Crossmember Kit welds right into place and is pre-fit to maintain the proper geometry with factory anti dive built right in. The wide spread of the upper control mounting points, which match the original Mustang II, provides plenty of clearance, even for B/B Chevy engines. We recommend the use of Tubular Strut Rods rather than factory strut rods due to the angle of the factory units.
HCX-320-E Crossmember $359.00
SUB-FRAME/CROSSMEMBER ASSEMBLY
NO WELDING! Now install a Heidt's Mustang II IFS in your Nova with no welding. Even the motor mounts are already welded in place. Simply unbolt your complete front clip and bolt in the Heidt's complete suspension sub-frame. Install the firewall supports, bolt on the suspension components and you are all set. The stock radiator mount even bolts right up. Since this is a no weld installation, we require you to use our Full Lower A-Arms as we welded the sleeves in place for you and the factory strut rods don't work well anyway. All the other factory Mustang II components, available separately, can be used.
HCX-320-S Sub-Frame/Crossmember Assembly HMM-120 Rubber Motor Mounts (sold in pairs)
COMPLETE FRONT END PACKAGE
Package includes the above Sub-Frame/Crossmember and our Mustang II Independent Front Suspension with 2" Dropped Spindles, 11" Disc Brakes, Tubular Upper & Lower Control Arms.
Now you can install new inner fender panels to complete your '62-'67 Nova Sub-Frame Installation. They are formed to bolt directly to the fenders, core supports and frame rails, and come complete with hood hinge mounting plates, firewall seals, and all hardware. They can also be used where a Mustang II IFS or other type of suspension has been installed on stock frame rails.
HCX-325 '62-'65 Nova $199.00/pair HCX-326 '66-'67 Nova $199.00/pair
64½ -70 MUSTANG
Now give your '64½ - '70 MUSTANG the lowered look and superior handling the street rods have enjoyed for years. Zig's now offers a Mustang II Front Suspension crossmembers and components for your MUSTANG that make it easy!
CROSSMEMBERS
This new Mustang II Crossmember is specifically designed to fit the front frame of '64½ to '70 mustang. This Independant Front Suspension (IFS) Crossmember Kit welds right into place and is pre-fit to maintain the proper geometry with factory anti dive built right in. The wide spread of the upper control mounting points, which match the original Mustang II, provides plenty of clearance, even for B/B Chevy engines
HZX-6470 Crossmember $419.00
COMPLETE FRONT END SUSPENSION PACKAGE
Zig's now offers a complete IFS package for your Mustang. Kit includes : (1) Mustang II Independent Front Suspension with 2" Dropped Spindles, 11" Disc Brakes, Tubular Upper & Lower Control Arms.
ZMUSTIIFE/WA (Manual Rack) $1769.00 PLUS SHIPPING
Z-MUSTFEP/WA (Power Rack) $1869.00 PLUS SHIPPING
|
|
|
|
|
| All Prices subject to change without notice. |
Last Updated:
|
||
| Copyright © 2000-2002 - Zig's Street Rod Center Inc. | |||
